| PARAMETERS |
SON-250D |
SON-400D |
INPUT:
Rated Voltage |
240V
|
240V
|
| Voltage Range |
192 ~ 254 Vac |
192 ~ 254 Vac |
| Frequency |
50/60 Hz |
50/60 Hz |
System Current:
Full Capacity
Dimming Mode |
1.04A +/- 10%
Lowest:
0.54A +/- 10%
|
1.67A +/- 10%
Lowest:
0.85A +/- 10%
|
System Circuit Power:
Full Capacity
Dimming Mode |
255W +/- 10%
Customised: Lowest 126W +/- 10%
|
405W +/- 10%
Customised: Lowest 202W +/- 10%
|
Power Factor:
Full Capacity
Dimming Mode |
> 0.98
> 0.93
|
> 0.98
> 0.93
|
Total Harmonic Distortion:
Full Capacity
Dimming Mode |
< 12%
< 20%
|
< 12%
< 20%
|
OUTPUT:
Lamp Type |
HPSV 250-T
|
HPSV 400-T
|
Lamp Wattage:
Full Capacity
Dimming Mode |
237W +/- 10%
Lowest at 106.2W +/- 10%
|
378W +/- 10%
Lowest at 188W +/- 10%
|
| Lamp Power Factor |
> 0.98 |
> 0.98 |
| Lamp Current Crest Factor |
< 1.8 |
< 1.8 |
Operating Frequency Range:
Full Capacity
Dimming Mode |
45 ~ 52 KHz
63 ~ 70 KHz
|
43 ~ 52 KHz
63 ~ 70 KHz
|
| Dimming Level |
Customised: Lowest at 50% |
Customised: Lowest at 50% |
OPERATING ENVIRONMENT
Ambient Temperature (Ta) |
0 ~ 55°C
|
0 ~ 55°C
|
| Housing Temperature (Tc) |
75°C |
75°C |
PROTECTION FEATURE:
No Load Condition |
Protection Enable,
Reset by power reset
|
Protection Enable,
Reset by power reset
|
| Hot Reignition Time |
Approx 3 ~ 5 min |
Approx 5 ~ 10 min |
| Reignition Before Tube Cooled Down |
Protection Enable,
Reset by power reset |
Protection Enable,
Reset by power reset |
| Lamp Fault |
Protection Enable,
Reset by power reset |
Protection Enable,
Reset by power reset |
| Inrush Current |
Suppressed |
Suppressed |
MECHANICAL:
Dimensions (L) x (W) x (H) mm |
Fig. 2
|
Fig. 3
|
| Weight |
~ 970 gm |
~ 1200 gm |
| PCB |
94V0 CEM1 |
94V0 CEM1 |
STANDARD DESIGN TO COMPLIED:
Safety Standard |
EN60928
|
EN60928
|
| Performance Standard |
EN60929 |
EN60929 |
| EMC Immunity |
EN61547 |
EN61547 |
| Current Harmonic Emission |
EN61000-3-2 |
EN61000-3-2 |
| Voltage Flicker |
EN61000-3-3 |
EN61000-3-3 |
| RFI |
EN55015/CISPR 15 |
EN55015/CISPR 15 |
